When fired at 1,650° for two hours, PMC3™ is one of the strongest fine silver metal clay available. It has a finer, smoother composition that’s easy to work with and manipulate. Embed findings with confidence—firing at a low temperature reduces potential heat-damage. Although the resulting metal will be less stronger than kiln firing, PMC3 is suitable for torch-firing as well as kiln-firing.
Unique paper-thin sheet of silver clay that needs no drying time. When used alone, requires kiln firing at 1472F for 30 minutes. This product was developed for you to enjoy making new creations using a wide range of Silver Quilling techniques, and...
Min. thickness is 2 cards. Best used within 12 months of mixing.
Quick & Easy to Mix
Quick & Easy to Rehydrate
A little quicker to dry
Takes amazing textures and now you can tackle the deeper moulds with ease
No Slumping & Strong in...
1x 50 gr pack. EZ960 is a great, all purpose metal clay with excellent working properties. Because the clay is a sterling silver alloy, one of its best attributes is its post firing strength, in comparison to fine silver. Invented by Bill Struve...
FYI Silver Metal Clay really begins to stand out from the rest when it comes to price. It also features the highest shrinkage rate of any premium clay out there. At approximately 28% to 30% you can really does amazing high detail pieces with this...
Quick & Easy to Mix
Quick & Easy to Rehydrate
A little quicker to dry
Takes amazing textures and now you can tackle the deeper moulds with ease
No Slumping & Strong in green state
Clay has great flexibility for carving &...
For use on dried greenware metal clay, Simply dab foam in water and rub against the edge/surface of metal clay you want healed. Wipe off excess clay or use excess clay to fill in cracks and divets. Cut them down with an exacto/blade knife to any...
This inherent strength makes EZ960 the perfect choice for jewelry that takes lots of abuse, such as rings and bracelets. It is also great for jewelry with findings and components such as bails, hinges and clasps, as well as delicate pieces that...
Refillable butane torch. This is a great little self igniting torch that can be used to torch fire small low temp metal clays. A wonderful introduction to metal clay.
Keep in mind that you will need a heat resistant surface such as a fire brick.
The clay firms up somewhat but stays pliable enough to bend, twist, shape--even join edges with slip—up to a month later (NOTE: You won't be able to ball-up and re-roll the clay; to do that, you'll need to rehydrate the clay and begin again)....
Absolutely one of the best torches for firing metal clay. Nice big bushy flame for maximum coverage for firing.
This Iwatani butane torch head fits most common large butane canisters that can be found locally at big box hardware or camping...
error Your review appreciation cannot be sent